Ampac FireFinder PLUS Specifications download pdf (Page 74)

Page 68

FIREFINDER PLUS

(

AUST

)

INSTALLATION

COMMISSIONING OPERATION

12.12 Bargraph Display Card

The Bargraph display card (BDC) provides a smoke obscuration bargraph, alarm indicators, a reset

and disable facility for a Pro-Sens fitted with an Ampac version of an APID fitted.

The BDC supports two detectors, which can be located in the same Pro-Sens unit or separate Pro-

Sens units.

12.12.1 Mechanical

The BDC is an a Add On, so can be mounted locally into a standard FACP into the cabinet door cut

out (as per SP1X, SP8X etc) or remotely using an enclosure

12.12.2 Front Panel Decal

The following is the propose decal for the BDC

Figure 94:

Bargraph Display Card Decal

12.12.3 Front Panel Controls

RESET

This control is used to send a reset command to the linked (configured) APID device.

Note: This control does not reset the FACP.

DISABLE/ENABLE

This control is used to disable / enable the linked (configured) APID device.

Note: This control can’t be invoked if the system’s sounders (Alarm Devices) have not been

silenced by means of FACP’s ALARMS SILENCE/RESOUND key.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 125 126

No comments

Ampac FireFinder PLUS Specifications Page 74