Ampac FireFinder PLUS Specifications download pdf (Page 32)

Page 26

FIREFINDER PLUS

(

AUST

)

INSTALLATION

COMMISSIONING OPERATION

After selecting the Loop number press this button to enter the device number for the

device to be interrogated.

Press this button followed by a number e.g. ZONE 4 to select the required zone.

- Active at access level 2 and 3.

Press this button after selecting the Zone number or the Loop and Device numbers to display the state

of the device. Meaning it is used in conjunction with the selection keys and alpha numeric keypad to

DISPLAY a zone or loop device.

- Active at access level 2 and 3

Use this button to access a range of devices. E.g., 2 TO 7. The selection keys are used to select a

loop device (or range of devices by using the TO key) or select a zone (or range of zones).

Once a device or zone (or range) has been selected, the DISPLAY or DEVICE DISABLE/ENABLE

controls can be used

to - Active at access level 2 and 3.

These buttons are used to navigate around the panel’s menus and enter data. If entering a descriptor,

or some other data that contains characters as well as numbers, pressing the buttons multiple times

will scroll through the available letters written on the button, in sequence. Eg. 1,A,B,C.

Used for data entry into the current field. If he current field is alpha numeric (descriptor strings), then

the alphas are active and selected by consecutive operations of the appropriate key.

- Access level 2 / 3 required

The single arrows are used to select the entry (or insertion point) when entering data.

If the back arrow is used to move the entry point beyond the start of the current field – then the

previous data entry field will be displayed.

- Access level 2 / 3 required

Press and hold the “display” button while using these buttons to adjust the LCD contrast

The double arrows are use to select the data entry field. These are mostly used when performing on

site programming and selecting the data entry field which is to be edited.

- Active at access level 2 and 3

Used to enter / terminate data entry into the selected field

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 125 126

No comments

Ampac FireFinder PLUS Specifications Page 32