FIREFINDER NZ
CONFIGURATION MANAGER
4.3 The Project View
The screen below is a typical view that will be seen by the operator when a single panel is to be
programmed. The Panel represents the hardware which is common in all panels. C1 represents the
controller that interfaces with up to 8 slave modules.
Note: It is recommended that the panel section is programmed first followed by the controller.
Figure 18: The Project View
Figure 19: Edit Options for the Panel
Figure 20: Edit Options for the Controller
It is possible to edit the parameters of the panel by right clicking on the icon as shown above.
Similarly it is possible to edit the module types as shown.
Comments to this Manuals