Ampac FireFinder Series II AS442 Specifications download pdf (Page 85)

Page 80

FIREFINDER SERIES II INSTALLATION, COMMISSIONING &

OPERATION

Normal / Default: The format for reporting that everything is normal is:

Current Date and Time (DD/MM/YYYY HH:MM)

System Status

This screen is only displayed when there are no alarms, fault or disables on the panel.

The default screen is only displayed when there are no device alarms, device faults or device

disables present on the system. The highest priority current system status will be displayed and can

be one of the following listed in order of highest to lowest priority:

“SYSTEM ALARM”

“SYSTEM PRE-ALARM”

“SYSTEM FAULT”

“SYSTEM ISOLATE”

“SYSTEM NORMAL”

Config: The Config screen displays the following

Address

VX.X ( This is the code software version number )

A - A + C - C+

Adjusting Address: (see section 14.4)

A - A +: adjusts the address 1 to 30, 30 being the maximum number of SmartTerminal’s that can be

connected to the FACP, (default is 255 which is not a valid address).

The function keys perform the following;

A – Press “PREVIOUS” A + press “NEXT”

Adjusting Contrast:

C - C+: decreases [-] and increases [+] the LCD contrast level.

The function keys perform the following;

C – Press “SILENCE BUZZER” C + press “RESET”

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 113 114

No comments

Ampac FireFinder Series II AS442 Specifications Page 85