Ampac FireFinder PLUS Specifications download pdf (Page 32)

Ampac Technologies Pty Ltd

FireFinder

Operators Manual

PAGE 31

DOC No:G0109WO1.doc DIR: L:\MANUALS DATE: 30/11/00 REVISION: 3

7.7.1 Forgotten Passwords

If you have forgotten your password, enter 9999 into the password field. You will then be given a 4 digit

password key. You must then contact the AMPAC head office and quote the number you have been

given. We can then issue you with a temporary password, allowing you access to the level 3 functions so

that you can program a new password. The temporary password will become invalid if you enter 9999

again or if the panel is re-powered.

7.8 Manual I/O Control

With the FireFinder

it is possible to manually override the inputs and outputs within a system. Providing

an input or an output has been programmed into the FireFind er

then it is possible to use this menu as

described below. This menu can be used in commissioning or manual checking of I/O.

Fig 27: The Manual I/O Control Menu

Press 5 while on the Main Functions menu to display the Manual I/O Control menu

0. Input:

0. In a Panel: Enter the I/O Controller number then the input number, This will display the

descriptor for the input and its current state, you can then turn the input on or off or remove

manual control.

1. On a Loop: Enter the loop number, the sensor number and the input number. This will display

the descriptor for the input and its current state, you can then turn the input on or off or remove

manual control.

2. Remove All Manual Input Control: Will remove all manual input control.

1. Output: Same as above for inputs but for outputs.

2. Remove All Manual Control: Will remove all manual control.

MANUAL I/O CONTROL

0: INPUT 1: OUTPUT

3: REMOVE ALL MANUAL CONTROL

SELECT No.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 44 45

No comments

Ampac FireFinder PLUS Specifications Page 32